power entry modules without line filter df www.schurter.com/pg0 5 connectors iec appliance inlet c14 with recessed circuit breaker ta45 c14 70 c description - panel mount: screw-on version from front or rear side, snap-in version from front side - 2 functions: appliance inlet protection class i, circuit breaker type ta45 2-pole - quick connect terminals 6.3 x 0.8 mm approvals - vde certificate number: 40011305 - ul file number: e96454 characteristics - all single elements are already wired - switch non-illuminated or illuminated thermal overload protection optional with undervoltage- or remote trip release - qualified for use in equipment according iec/en 60950 other versions on request - unwired versions - line switch 1-pole - other rocker marking - variant with notch for v-lock mating cordsets references alternative: version with line filter df1 2 substitute for type 614 5 weblinks general product informatio n , approval s , roh s , china-roh s , mating connector s , e-stor e , schurter-stock-chec k , distributor-stock- chec k , accessorie s newly available variants corresponding to v-lock mating cordset. the connector is equipped with a notch intended for use with the latching cordset. the cord latching system prevents against accidental removal of the cordset. technical data ratings iec 10 a / 250 vac; 50 hz ratings ul/csa 1 - 15 a / 250 vac; 60 hz dielectric strength > 2.5 kvac between l-n > 3 kvac between l/n-pe (1 min/50 hz) allowable operation temp. -10 c to 55 c degree of protection from front side ip 40 acc. to iec 60529 protection class suitable for appliances with protection class 1 acc. to iec 61140 terminal quick connect terminals 6.3 x 0.8 mm panel thickness s screw: max 8 mm mounting screw torque max 0.5 nm snap-in: 1/1.5/2/2.5/3 mm material: housing thermoplastic, black, ul 94v-0 appliance inlet c14 acc. to iec/en 60320-1, ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 10 a, protection class 1 circuit breakers acc. iec/en 60934, ul 1077, csa 22.2 no. 235 2-pole rocker switch, illuminated or non- illuminated. optional with undervoltage- or remote trip release short circuit capacity icn: at in < 3a/240vac : 10 x in at in 3a/240vac : 300a line switch rocker switch 2-pole, non-illuminated or illuminated, acc. to iec 61058-1 technical detail s
power entry modules without line filter df www.schurter.com/pg0 5 connectors dimensions 91.5 mm * version ta45 with undervoltage release diagrams diagram 1) line 2) load
power entry modules without line filter df www.schurter.com/pg0 5 connectors
power entry modules without line filter df www.schurter.com/pg0 5 connectors t echnical data (continued) cir cuit br eaker t ripping characteristics i n < 3 a t ripping characteristics i n > _ 3? < _ 15 a ef fect of ambient temperatur e 1) the unit is calibrated for an ambient temperatur e of +23 c. to deter mine the rated curr ent for a lower or higher ambient tempera- tur e, use a corr ection factor fr om the table below . * ambient temperatur e [c] corr ection factor ?10 0,89 ? 5 0,91 0 0,92 +23 1,00 +30 1,03 +40 1,08 +55 1,16 please note that schurter will establish an inter nal part number for logistical use in addition to the or der code. the format of this inter nal part number is, for example df11.xxxxxxx * t emperatur e must be measur ed at the r ear of the br eaker next to the terminals after equipment operating temperatur e has been reached. 1) example rated curr ent at +23 c 6,0 a ambient temperatur e +40 c corr ection factor 1,08 chosen rated curr ent at + 40 c ambient temperatur e 6 a x 1,08 = 6,5 a 10?000 60 2000 1000 500 200 100 50 20 10 5 2 1 0,5 0,3 0,2 0,1 [ sec ] [ min ] 10 5 1 30 20 1,05 multiple of rated curr ent [ x i n ] 10 8 5 4 3 2 1,32 t ripping time t ype t a45 rated curr ent i n < 3 a 1-pole pr otected 2- pole pr otected ambient temp. +23 c 10?000 60 2?000 1?000 500 200 100 50 20 10 5 2 1 0,5 0,3 0,2 0,1 [ sec ] [ min ] 10 5 1 30 20 1,0 5 [ x i n ] 10 8 5 4 3 2 1,3 2 t ype t a45 rated curr ent i > 3... < 15 a 1-pole pr otected 2- pole pr otected ambient temp. +23 c multiple of rated curr ent t ripping time n or der code ta 45 (2-pole r ocker -switch without accessories) a b t w f 1 5 0 c 0 . 0 0 1 0 . 0 1 9 see table 1 or der code (or der example) specials 9 v -lock-notch wiring 1 wir ed 2 unwir ed pr otection class 0 pr otection class i mounting 0 scr ew 1 snap-in s = 1.0 mm 2 snap-in s = 1.5 mm 3 snap-in s = 2.0 mm 4 snap-in s = 2.5 mm 5 snap-in s = 3.0 mm t erminals 1 quick connect 6.3 x 0.8 00 without line filter t ype df11 .
5 power entry modules without line filter df www.schurter.com/pg0 5 connectors packaging unit 20 pcs accessorie s description 0859.010 9 rear cover assorted cover s rear cover mating outlets/connector s category / description appliance outletoverview complet e iec appliance outlet f, screw-on mounting, front side, solder terminal 478 7 iec appliance outlet f, snap-in mounting, front side, solder or quick-connect terminal 478 8 iec appliance outlet f or h, screw-on mounting, front side, solder, pcb or quick-connect terminal 509 1 iec appliance outlet f or h, screw-on mounting, front side, solder or quick-connect terminal 509 2 appliance outletfurther types todf1 1 connectoroverview complet e iec connector c15, rewireable, straight 010 1 iec connector c15a, rewireable, straight 010 2 iec connector c15a, rewireable, straight 0102- g iec connector c15a, rewireable, angled 011 2 iec connector c13, rewireable, angled 401 2 connectorfurther types todf1 1 ... power cordoverview complet e power cord with iec connector c13, angled 031 1 power cord with iec connector c13, angled 301 1 power cord with iec connector c13, angled 301 2 power cord with iec connector c13, angled 301 3 power cord with iec connector c13 302 0 power cordfurther types todf1 1 ... the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
